Search results for "flow [Keywords]"
showing 10 items of 469 documents
Adaptive motion estimation and video vector quantization based on spatiotemporal non-linearities of human perception
1997
The two main tasks of a video coding system are motion estimation and vector quantization of the signal. In this work a new splitting criterion to control the adaptive decomposition for the non-uniform optical flow estimation is exposed. Also, a novel bit allocation procedure is proposed for the quantization of the DCT transform of the video signal. These new approaches are founded on a perception model that reproduce the relative importance given by the human visual system to any location in the spatial frequency, temporal frequency and amplitude domain of the DCT transform. The experiments show that the proposed procedures behave better than their equivalent (fixed-block-size motion estim…
An experimental study for the characterization of fluid dynamics and heat transport within the spacer-filled channels of membrane distillation modules
2018
Abstract The thermo-fluid dynamic behavior of spacer-filled channels for membrane distillation was investigated experimentally. Several different geometry were investigated thanks to customized reference spacers manufactured using a 3D printer. In particular, two sets of experiments were conducted: in the first set, cylindrical filaments were orthogonally arranged and the flow attack angle was made to vary from 0o to 90o; in the second set, the flow attack angle was kept symmetrical and the filament angle was made to vary from 30° to 150°. Each spacer was tested for Reynolds numbers between 200 and 900 in the hot channel, while maintaining a constant temperature difference of 13 °C between …
Monitoring response to treatment in asthma management: food for thought
2004
Asthma is a chronic inflammatory disorder of the airways that is characterized by episodic symptoms. In this regard, asthma management has classically involved periodic re-assessment by the health-care provider, during which therapy is altered mainly based on clinical and physiological parameters, such as assessment of symptoms, spirometry and peak expiratory flow monitoring. In this context, various markers of airway inflammation (e.g. eosinophils in the induced sputum, nitric oxide in the exhaled air) have been proposed to assess the severity of asthma and to adjust the therapy accordingly. The evaluation of airway hyper-responsiveness with different stimuli has also been suggested as a n…
A New Method for the Price Determination of the Reactive Power Supply
2006
This paper addresses the development of an accurate model for the pricing of reactive power supply as an ancillary service. Reactive power supply is one of the most important ancillary services in the field of transmission systems security. The present work is focused on building a reactive power market at which the Distributors can also take part in injecting reactive power at the connected HV/MV nodes. The authors have studied the particular case of the reactive power supplied by sub-transmission or distribution networks, connected to the nodes of the transmission system. The aim of this work is to establish a reactive power price by crossing demand and offer curves.
Effective recovery of perfluoropolyether surfactants from PVDF and PTFE by supercritical carbon dioxide extraction
2007
Abstract The extraction of ammonium carboxylate perfluoropolyether surfactants from poly(vinylidenefluoride) (PVDF) and poly(tetrafluoroethylene) (PTFE) was performed with supercritical carbon dioxide. When proper conditions in terms of temperature, pressure and flow rate were used, extraction recoveries higher than 90% were obtained. For PVDF (with a concentration of surfactant of 5% w/w), at low pressure (12 MPa) and 40 °C, more than 100 min are necessary to have a quantitative extraction. On the other hand, at higher pressure (20 MPa) a quantitative recovery was obtained after few minutes. A strong influence of the temperature on the extraction recovery was also found. In the case of PTF…
CFD Simulation of Particle Distribution in a Multiple-impeller High-Aspect-Ratio Stirred Vessel
2000
Publisher Summary This chapter describes fully predictive simulations of solid–liquid suspensions in a high-aspect-ratio, multiple-impeller stirred tank. These are performed by using the Inner Outer impeller modeling technique coupled with the Multi Fluid Model (MFM) for the treatment of the dispersed phase. The strongly simplified Settling Velocity Model (SVM) is also tested. The effects of free-stream turbulence on the drag coefficient CD and particle settling velocity are accounted for by means of a recently proposed correlation. Comparison of simulation results with experimental particle concentration profiles shows that the MFM approach leads to fair agreement with experimental data. R…
Simulation of Reaction-Induced Phase Separation in Surface Alloy
2008
Using kinetic Monte Carlo method we simulate the dynamics of biatomic Au0.3Ni0.7 surface alloy separation on Ni(111) due to Ni(CO)4 out-reaction. The experiment of Vestergaard et al. is modeled by counterbalancing dynamical processes and interactions between reactants. The simulations demonstrate step flow rate increase with CO coverage, cCO, in qualitative agreement with the experiment only for cCO <∼ 0.45 monolayer. Moreover, we demonstrate both CO influence on reaction process and Au domain formation.
Experimental Tests to Validate a Simple Procedure to Design Dual-Diameter Drip Laterals on Flat Fields
2023
Multiple-diameter laterals reduce the total cost in microirrigation systems, however, the length of each sublateral should be determined carefully to assure appro-priate performance of emitter flow rates. The most accurate method is the numerical trial and error, which is time-consuming. A series of research efforts have been made to propose simple analytical design procedures. By using the power-law form of the Darcy-Weisbach formula, and equal emitters spacing for the sublaterals, Sadeghi et al. (Sadeghi et al. in J Irrig Drain E-ASCE 142:04,016,020, 2016) extended a previously introduced design solution for one-diameter laterals to tapered laterals. Recently, a simplified procedure to de…
Sedimentation Tanks for Treating Rainwater: CFD Simulations and PIV Experiments
2021
The removal of solids is the most important step when treating rainwater. The article evaluates two designs of sedimentation tanks that can be used for the continuous separation of fine particles from water: OS—standard sedimentation tanks, and OW—swirl sedimentation tanks. The tanks were studied by conducting computational fluid dynamics (CFD) modeling and particle image velocimetry (PIV) experiments. The settling process in sedimentation tank was carried out at varying operating flow rates. A tank with a modified structure was used for the tests, where water was supplied by a nozzle placed at an angle. This solution made it possible to obtain a rotational flow that transported the suspend…
Influence of the pressure head sequence on the soil hydraulic conductivity determined with tension infiltrometer
2005
An increasing and a decreasing sequence of pressure head, h0, values were applied with the tension infiltrometer (TI) to determine the corresponding hydraulic conductivity, K0. The pressure head sequence is expected to influence the K0 results given the hysteretic nature of the hydraulic conductivity relationship. The objective of this study was to evaluate the influence of the selected pressure head sequence on the hydraulic conductivity of a sandy loam soil measured by a multipotential TI experiment. Twenty experiments were carried out by applying h0 values varying between -150 and +5 mm (site A). The h0 values ranged from -150 to -10 mm in another 20 spots (site B). Both wetting and dryi…